DVO 5810

3G-SDI 1x6 Distribution Amplifier with Fiber I/O

The DVO 5810 is a 3G-SDI distribution amplifier with support for BNC or Fiber inputs. The Module provides 6x 3G-SDI BNC outputs and 1x Fiber output.

It works in a 1×6 distribution mode. Reclocking and non-reclocking modes are available for the input.

The optical outputs are CWDM compatible with 18 selectable wavelengths, (non CWDM support is also available).

The input video standard is auto-detected. In non re-clocked mode the card transparently passes any data between 15Mbit/s and 3Gbit/s. Support for ASI/DVB and SMPTE 310 signals is provided.

The Fiber SFP sub-module is secured on the back-plate allowing for removal and hot swapping without disconnecting any rear I/O fiber connections.

This module is ideally suited for demanding digital multi-format broadcast and professional applications.

Local settings are provided via an integrated dip switch on the card edge.

The card module is fully compatible with LynxCentraal. It can be configured, controlled and updated using Windows or MacOS.

Funktioner

• Supports 3G/1.5G/SD-SDI and ASI/DVB Formats
• 1x6 (plus fiber) Distribution Mode
• 1x BNC or Fiber SDI Input
• 6x BNC and 1x Fiber SDI Outputs
• Reclocking or non-reclocking of input (selectable)
• Auto-detect input video standard.
• CWDM support with 18 selectable optical wavelengths
• Transparently pass data between 15Mbit/s and 3Gbit/s in non re-clocked mode.
• Input Status LED
• LC fiber connections
• Fiber SFP module secured in backplane. Module can be freely removed or replaced without disconnection of fiber cables
• Remote control, status monitoring and error reporting when used with LYNX control system.
• SNMP error reporting when used with RCT 5023 controller
• Hot Swappable

Specifikationer

DVO 5810	4250479321694 — DVO 5810 — 3G-SDI 1×6 Distribution Amplifier Card Module — No Fiber SFP