DVO 5820

3G-SDI 2x4 Distribution Amplifier with Fiber I/O

The DVO 5820 is a 2-Channel distribution amplifier suitable for 3G-SDI/ASI video up to 1080p60 with two fiber inputs. The card works in a 2×4 mode with 3x 3G-SDI BNC plus 1x Optical outputs per channel.

The 2nd Channel input can be switched to a 3G-SDI BNC input instead of fiber.

The optical outputs are CWDM compatible with 18 selectable wavelengths, (non CWDM support is also available).

The input video standard is auto-detected. In non re-clocked mode the card transparently passes any data between 15Mbit/s and 3Gbit/s. Support for ASI/DVB and SMPTE 310 signals is provided.

This card module is ideally suited for demanding digital multi-format broadcast and professional applications.

The Fiber SFP sub-modules are secured on the back-plate allowing for removal and hot swapping without disconnecting any rear I/O fiber connections.

Local settings are provided via an integrated dip switch on the card edge.

The card module is fully compatible with LynxCentraal. It can be configured, controlled and updated using Windows or MacOS.

Funktioner

• Supports 3G/1.5G/SD-SDI and ASI/DVB Formats
• 2-Channel 1x4 distribution mode
• 2x Fiber inputs, with selectable BNC input on Channel 2
• 3x BNC and 1x Fiber outputs per channel
• CWDM support with 18 selectable wavelengths
• Reclocking or non-reclocking mode for each channel
• Auto-detect input video standard.
• Transparently pass data between 15Mbit/s and 3Gbit/s in non re-clocked mode.
• Input Status LED for each channel
• LC fiber connections
• Fiber SFP modules secured on backplane. Module can be freely removed or replaced without disconnection of fiber cables.
• Monitor and Control using the powerful and intuitive Lynx Centraal application
• SNMP error reporting when used with RCT 5023 controller
• Hot Swappable

Specifikationer

DVO 5820	4250479321700 — DVO 5820 — 3G-SDI 2×4 Distribution Amplifier Card Module — No Fiber SFP