ORX 5800

4-Channel Fiber to 3G-SDI Receiver

The ORX 5800 is a 4-Channel Fiber to 3G-SDI converter with router for video signals up to 1080p60. Each channel has automatic input clock rate and signal presence detection with optional reclocking.

Two of the fiber inputs can be substitued for 3G-SDI BNC inputs. In non-reclocked mode the module will transparently pass any data between 15Mbit/s and 3Gbit/s. Support for ASI/DVB and SMPTE 310 signals is available.

The standard mode of operation will directly map each input to its corresponding output. An integral 4×4 signal router can be used to change I/O channel mapping.

Up to 10 ORX 5800 (40 fiber Rx) can be placed in a standard 2RU Lynx rack frame. The fiber SFPs are secured to a connector board allowing for the main card to be removed or swapped without affecting the rear connections.

This module is ideally suited for demanding digital multi-format broadcast and professional applications. It is fully compatible with Lynx Centraal for remote control, status monitoring and error reporting.

NOTE: When installed in an RFR 5018 chassis please make sure a rack controller (RCT 5023 G) is present in the rack.

Funktioner

• Supports 3G/1.5/SD-SDI and ASI Formats
• Selection of 18 wavelengths available for CWDM applications
• Extra 2x 3G-SDI BNC Inputs
• 1260nm to 1620nm wavelength operational range
• Internal 4x4 signal router for flexible I/O mapping (remote only)
• Reclocking or non-reclocking mode for each channel
• Auto-detects input clock rate
• Transparently pass data between 15Mbit/s and 3Gbit/s in non-reclocked mode.
• Input Status LED for each channel
• LC Single-mode and Multi-mode Fiber connections
• Remote control, status monitoring and error reporting when used with LYNX control system
• SNMP error reporting when used with master controller option
• Hot Swappable

Specifikationer

ORX 5800	4250479322172 — ORX 5800 — 4-Channel Fiber to 3G-SDI Receiver — 2x OH-RR-1 SFPs Included