OTX 5840

4-Channel 3G-SDI to Fiber Transmitter

The OTX 5840 is a 4-Channel 3G-SDI to Fiber converter with a signal router. It is suitable for 3G-SDI/ASI-DVB video signals up to 1080p60.

Each channel has automatic input clock rate and signal presence detection with optional signal reclocking.

The module provides 4x 3G-SDI fiber outputs and 2x 3G-SDI outputs which can be mapped using the integrated 4×6 signal router. In non-reclocked mode the module will transparently pass any data between 15Mbit/s and 3Gbit/s.

Chose from 18 wavelengths for CWDM applications, or select all 1310nm wavelengths for non CWDM applications.

Up to 10 OTX 5840 modules, (40 fiber Tx) can be placed in a standard 2RU Lynx Rack Frame. The fiber SFPs are secured to a connector board allowing for the main card to be removed or swapped without affecting the rear connections.

This module is ideally suited for demanding digital multi-format broadcast applications. It is fully compatible with Lynx Centraal for remote control, status monitoring and error reporting.

NOTE: If installed on an RFR 5018 chassis please make sure a rack controller (RCT 5023 G) is present in the rack.

Funktioner

• Supports 3G/1.5G/SD-SDI and ASI Formats
• 4-Channel 3G-SDI to Fiber Transmitter
• Extra 2x assignable 3G-SDI BNC Outputs
• Internal 4x6 signal router for flexible I/O mapping (remote only)
• Selection of 18 wavelengths available for CWDM applications
• Reclocking or non-reclocking mode for each channel
• Auto-detects input clock rate
• Transparently pass data between 15Mbit/s and 3Gbit/s in non-reclocked mode.
• Input Status LED for each channel
• LC Single-mode and Multi-mode Fiber connections
• Remote control, status monitoring and error reporting when used with LYNX control system
• SNMP error reporting when used with master controller option
• Hot Swappable

Specifikationer

OTX 5840	4250479322196 — OTX 5840 — 4-Channel 3G-SDI to Fiber Transmitter — No Fiber SFP